Welding machine for connecting thermoplastic pipes

McElroy is a designer and manufacturer of fusion equipment used to connect thermoplastic pipes such as high-density polyethylene (HDPE), fusible PVC™ and polypropylene.

PO Box 580550, Tulsa, OK 74158-0550, United States of America

PO Box 580550, Tulsa, OK 74158-0550, United States of America

Company Details Product and Service Video White Paper Project Press Release Regional Office For more than 60 years, McElroy has been committed to providing innovative and high-quality products and services. McElroy designed and manufactured a series of fusion equipment for joining thermoplastic pipes including high-density polyethylene (HDPE). The company provides a full set of accessories designed to improve on-site productivity and efficiency. Its commitment to the industry includes passing McElroy University's extensive training program to ensure that operators and inspectors develop best practices in the quality and reliability of fused piping systems. The fusion splicer HDPE and hot-melt joints used in the mining industry have played an important role in the mining industry. The combination of non-corrosive thermoplastic pipes and hot melt provides a cleaner solution with no risk of leakage. HDPE can withstand the abrasive acidic water commonly found in mines. The fusion machine heat-welds the surfaces of the two pipes together to form an integral pipe. This eliminates the chance of leakage at the joint. For various reasons, mines all over the world have chosen this combination. McElroy Manufacturing Many times, thermoplastic pipes are put into use to transport liquids, gases and even coarse solids, such as slurries. HDPE is usually the first choice because it is flexible and can withstand the ground motions that occur during earthquakes and soil movement. McElroy designed its first fusion splicer in 1969. Since then, the company's product portfolio has expanded from 0.5 inch copper tube size (CTS) to 2,000 mm pipe size, which is the most comprehensive product line of all welding equipment manufacturers. Fusion equipment is available in a variety of models, from rolling and crawler models to car-only models to meet specific site requirements. The creation of McElroy TracStar® in the late 1990s was inspired by the needs of the mining industry to create the world's first independent, self-propelled crawler machine. Users benefit from the mobility and hydraulic assistance of their key functions, requiring less manpower and increasing their productivity. In 2013, McElroy began to adopt a new design to meet the challenge of large diameters, as pipes were increasingly used to 2000 mm. Talon™ 2000 is a self-propelled machine with a jaw design that can automatically load the pipe from the ground, position it for fusion, and move it from one joint to another in the pipe. The new method of processing pipes is called assembly line, which provides a safer and more effective method of fusing large pipes. Productivity optimization accessories McElroy believes in providing solutions to problems; therefore, in addition to fusion splicers, McElroy also provides a variety of accessories and productivity tools that can significantly improve field efficiency. Examples include its pipe racks and low profile rollers, as well as PolyHorse® and MegaMc® PolyHorse pipe handling systems, which consist of a series of adjustable brackets to store and help move and align pipes on the job site. These adjustable shelves provide a less hazardous environment for handling tube bundles and reduce labor costs while increasing productivity on the job site. Quality assurance quality testing and quality assurance of fusion equipment can bring huge benefits to any construction site. McElroy DataLogger® enables the operator to log the parameters of the pipeline fusion process to determine if the correct procedures have been followed. Data elements such as time, temperature and pressure are recorded on this rugged tablet. The latest DataLogger also allows operators to scan data and capture photos and GPS coordinates. DataLogger can be used in conjunction with Vault™, which is a web-based secure server that can store fusion joint data. This allows users to access their joints from any location and use various analysis tools via internet access. For quality testing, there are multiple options. McElroy's Guided Side Bend Tester and In Field® Tensile Tester are two such tools that allow for qualitative testing in the field to ensure that the joint meets the appropriate standards. If laboratory type testing is required, McElroy also provides McSnapper® to destructively test impact resistance. Operator training courses McElroy University provides training in a variety of ways. Training is provided at its factory in Tulsa, Oklahoma through certified instructors across the United States, online courses, and on-site customized training based on customer requirements. Courses include operator qualification, troubleshooting and reconstruction, and inspector training. Each lesson includes a combination of classroom and practical lessons, followed by after-school tests to ensure that students understand the correct concepts and procedures. Students who successfully pass the test will obtain the McElroy University Operator Qualification, which is valid for two years. For more information about McElroy equipment, please visit www.mcelroy.com. White paper McElroy Optimized Cooling™ During the fusion process, the most important time for each joint is attributed to the cooling procedure. Press release MINEXPO 2021 We are looking forward to seeing you in less than a week! Products and services TracStar® iSeries-Fusion's evolution The next generation of TracStar® machines provide the industry with a sophisticated, robust and efficient fusion machine. August 19, 2021 Company link www.mcelroy.com TracStar® iSeries DataLogger® 7 Facebook Linkedin Twitter Instagram Youtube Pit Bull® 26 Fusion Machine is designed for trenches. February 19, 2019 Rolling 28 Fusion Machine has been the standard since 1975. On February 19, 2019, Acrobat™ 180 is used for butt welding applications to flexibly meet the needs of any work site. On February 19, 2019, the Pit Bull® 28 compact fusion machine was built specifically for trenches. On February 19, 2019, TracStar® 28 Series 2 Pipe Welding Machine was the first on site. February 19, 2019 The Revolutionary Talon™ 2000 Talon 2000 is a self-propelled vehicle with a unique ability to safely hoist the pipe from the ground, position it for fusion, and move it from the joint to the Connector. March 15, 2021 TracStar® iSeries – Evolution of Fusion The next-generation TracStar® machine provides the industry with a sophisticated, robust and efficient fusion machine. August 19, 2021 TracStar iSeries features and advantages August 23, 2021 McElroy manufacturing, episode 1-Talon stepped into McElroy's "machine and mechanical world", we learned about Talon-this machine completely subverts tradition Fusion equipment. On February 4, 2021, McElroy® Talon™ 2000 McElroy introduced Talon™ 2000-for fusion of 54-inch OD to 2000 mm OD pipes. March 29, 2016 McElroy® Talon™ 2000 – For fusion of 54in OD to 2,000mm OD tubes May 17, 2016 McElroy Optimized Cooling™ During the fusion process, the most important time for each joint is attributed to the cooling process . March 15, 2021 High-density polyethylene piping system Pipes made of polyethylene are a cost-effective solution to various piping problems in municipal, industrial, marine, mining, landfill, pipeline and agricultural applications. On September 16, 2020, polyethylene plays a vital role in protection. For most people, water has never been a problem until they turn on the tap and nothing comes out. On April 23, 2020, MINEXPO 2021 has less than a week to look forward to seeing you! On September 8, 2021, McElroy University launched new courses and a new webpage. McElroy University provides a wide range of training to meet the needs of the entire industry. On August 19, 2021, McElroy holds a webinar on the future of plastic pipe integration. Learn about McElroy’s new TracStar® i series, and the MCU inspector qualification course on May 4, 2021 is now available online and on-demand, without booking a flight, providing inspections Qualification courses are now available exclusively online through McElroy University. On March 15, 2021, McElroy launched the new Tracstar iSeries Fusion Splicer McElroy built on the traditional success of TracStar® and launched the TracStar iSeries, bringing a new level of performance and reliability to the pipeline fusion splicing industry. On March 12, 2021, McElroy appointed Vikrant Sanglikar as the new country head of the India office. McElroy, a leading manufacturer of pipe fusion machines used in the construction of thermoplastic pipes worldwide, is pleased to announce that Vikrant B Sanglikar will join the team as the new country The director is its India office. January 28, 2021 INFUSION 2020: New products are popular This year's INFUSION showcased two dazzling stars in the form of virtual events-the new TracStar® iSeries and DataLogger® 7. On October 16, 2020 McElroy DataLogger® 7: A powerful new tablet with a battery life of more than 14 hours. McElroy has made progress in battery technology, processing power and integration capabilities by releasing the new DataLogger 7. More integration on October 9, 2020, more natural gas Shell announced in October 2018 its plan to develop more onshore natural gas fields in Queensland, Australia. New DataLogger® 6 and Vault™ FAQ on September 16, 2020 We have added a useful new DataLogger and Vault FAQ section to our website. These how-to guides solve some of the most common problems and explain the new features of the two platforms. On April 23, 2020, McElroy University’s new online learning series is now available at McElroy University, and learning is endless. For a limited time, you can still directly receive training from fusion experts through our new online learning series! Stress test on April 16, 2020-DataLogger 6 now available on DataLogger® 6 now provides a guided workflow for recording the details of the stress test and a digital diagram of the process. On March 24, 2020, DataLogger® 6 update 1.15 provides breakthrough features McElroy brings productivity improvements and exciting new features to DataLogger 6, enabling users to record and analyze more work sites. The long-distance product display on Infusion19 on March 17, 2020 The biggest star of INFUSION19 is the machine! Guests who come to Tulsa for a three-day peace, love and integration have the opportunity to contact, see and interact with more types of polyethylene and polypropylene products at this year's product exhibition. October 16, 2019 Use McElroy Sidewinder to easily achieve saddle fusion. When it comes to sidewall fusion, there is no tool better than McElroy Sidewinder for the job. McElroy focuses on TracStar 1200 on September 26, 2019. McElroy is the largest machine in the TracStar series and has everything an operator needs to efficiently fuse 16in OD to 48in OD (450mm to 1200) pipes. On August 20, 2019, McElroy announced the 2019-2020 trade show schedule. McElroy designs and manufactures various fusion equipment for connecting thermoplastic pipes, such as high-density polyethylene (HDPE), fusible PVC™ and polypropylene. On July 16, 2019, McElroy announced additional DataLogger® functions. McElroy has updated its DataLogger 6 additional functions. Introduced on April 23, 2019 Hornet™ XL Outlet Fusion becomes bigger with Hornet XL. McElroy brought the industry's first integrated polypropylene export fusion tool, with branch sizes ranging from 63 mm to 160 mm, with main sizes of 110 mm and larger. McElroy Upcoming Events on April 16, 2019 Below are upcoming events that will showcase McElroy's solutions. March 26, 2019 Plastic pipe welding brings McElroy machines to the Middle East With the opening of a plastic pipe welding factory in Dubai, McElroy fusion machines have a new home in the Middle East. February 25, 2019 McElroy DataLogger® 6 provides expanded machine options, enhanced graphic displays and more features. McElroy DataLogger® 6 provides expanded data collection functions and exciting new features, and now offers free software updates. February 18, 2019 5 DataLogger® 6 Release provides new functions for manual fusion of data logging functions, improved graphic display and more! November 26, 2018 Machine Focus Product Development Director Jason Lawrence TracStar Series 2 Pipe Welding Machine is a self-propelled vehicle equipped with a 4-claw carriage for butt welding of thermoplastic pipes by applying heat and pressure. On July 9, 2018, McElroy launched the Polygon™ integrated machine for miter, butt and undertaking welding. McElroy is a leading manufacturer of pipe welding equipment. Constructing multi-functional tools and pipe industry for HVAC. On May 14, 2018, McElroy released the industry's first export welding tool. McElroy designed the first integrated welding tool Hornet™ for the export welding of polypropylene pipes. On June 11, 2017, McElroy’s new QuickCamp™ was delivered to a Canadian construction site. McElroy’s new product called the QuickCamp™ system was recently successfully tested on a Canadian construction site, attracting to go there to witness the unique regional contractors and engineers at work Refuge and pipeline treatment system. On March 29, 2016, McElroy added Fortiline to the pipe fusion splicer distributor network. McElroy is a leading manufacturer of high-density polyethylene (HDPE) pipe fusion equipment and is pleased to add Fortiline Waterworks to its growing network of distributors. On November 4, 2015, McElroy added a new fusion splicing equipment distributor in Louisiana. McElroy is pleased to announce the addition of a new distributor to provide services to pipeline fusion splicer customers throughout Louisiana. On October 20, 2015, McElroy released its largest TracStar® TracStar® 1200 for large diameter pipes. The release of TracStar® 1200 brought the largest pipe welding capacity in McElroy's popular self-propelled crawler fusion splicer series to date. On October 4, 2015, McElroy's giant welding locomotive handles 2,000 mm pipe operations. McElroy launched Talon™ 2000, which aims to revolutionize the way large-diameter thermoplastic pipes are constructed. McElroy opened an office in India on March 22, 2015. McElroy is a manufacturer of one of the most widely used thermoplastic fusion machine production lines in the world. It has opened an office and demonstration facility in Bangalore, India, specializing in sales, leasing and technical services. February 19, 2015 Use McElroy's OneFit plug-in to improve work site efficiency McElroy further improved work site efficiency by creating the OneFit™ plug-in. On February 8, 2015, McElroy launched In-Ditch 48. The launch of McElroy In-Ditch 48 brings fusion capabilities to restricted working environments using large diameter pipes. On January 19, 2015, McElroy announced the launch of a new hydraulically adjustable pipe rack. McElroy brings hydraulic functions to the pipe rack lines of its 4 inches to 20 inches (200 mm-500 mm) pipes to help improve the welding site. Align thermoplastic pipes effectively. December 14, 2014 DataLogger® 5 is wireless through instant upload and review. McElroy is pleased to bring wireless capabilities to DataLogger® 5, which enables pipeline fusion operators to upload data to the DataLogger Vault™, where review and review can take place. Analyze real-time information from anywhere in the world. On June 10, 2014, PE Pipeline Alliance held a roadshow in Tulsa to promote solutions to replace aging water infrastructure. Cities across the country are facing the expensive and urgent task of replacing outdated water supply systems. Expensive and overly complex issues that disrupt traffic and disrupt services-the familiar waterline breaks. McElroy added three new distributors on April 6, 2014 McElroy recently announced three new distributors to provide services for domestic and foreign customers from east to west. January 1, 2014 North America PO Box 580550 Tulsa OK 74158-0550 United States 1-918-831-9236 customercare@mcelroy.com www.mcelroy.com TracStar® iSeries DataLogger® 7 Facebook Linkedin Twitter Instagram Youtube Asia, South Australia Pacific Unit 7/2 Panama Street Canning Vale Western Australia 6155 Australia Sergio Arellano-Sales Sergio Yibrin-Technical Center 61 8 94557599 (Sales) 61 8 94557599 (Technical Center) sarellano@mcelroy.com syibrin@mcelroy.com Europe, Middle East 11 Avant Business Centre Third Avenue Milton Keynes MK1 1DR Rafael Quintero, UK – Sales Malcolm Profit – Technical Center 1-918-831-9334 (Sales) 44 (0)1908 372259 (Technical Center) rquintero@mcelroy .com mprofit@mcelroy.com Mexico, Central America and Caribbean PO Box 580550 Tulsa OK 74158-0550 Juan Carlos Quintero 1-918-831-9377 jquintero@mcelroy.com South America Av. La Dehesa 1201. Torre Oriente, Oficina 710. Lo Barnechea Santiago Chile Nayib Joussef 56- 9-8449-1000 njoussef@mcelroy. com Brazil Av. Martini Vitoria Rossi 271 Indaiatuba São Paulo 13347-613 Brazil Dave Hughes dhughes@mcelroy.com India 8/4, Whitley Layout Whitefield Bangalore 560066 India Vikrant Sanglikar 91-80-28454873 vsanglikar Latest news Mining industry robot application buzz: 2021 Robotics mentioned in the second quarter increased by 93%. November 16, 2021 Commodity IG Lithium seeks a partner for the US brine lithium project. November 16, 2021 HSE A dangerous precedent: the new phase of Australian mining company is now issued 16 2021 November 16, 2021, the United States Geological Survey adds nickel and zinc to the list of key minerals. November 16, 2021

Company Details Product and Service Video White Paper Project Press Release Regional Office For more than 60 years, McElroy has been committed to providing innovative and high-quality products and services. McElroy designed and manufactured a series of fusion equipment for joining thermoplastic pipes including high-density polyethylene (HDPE). The company provides a full set of accessories designed to improve on-site productivity and efficiency. Its commitment to the industry includes passing McElroy University's extensive training program to ensure that operators and inspectors develop best practices in the quality and reliability of fused piping systems. The fusion splicer HDPE and hot-melt joints used in the mining industry have played an important role in the mining industry. The combination of non-corrosive thermoplastic pipes and hot melt provides a cleaner solution with no risk of leakage. HDPE can withstand the abrasive acidic water commonly found in mines. The fusion machine heat-welds the surfaces of the two pipes together to form an integral pipe. This eliminates the chance of leakage at the joint. For various reasons, mines all over the world have chosen this combination. McElroy Manufacturing Many times, thermoplastic pipes are put into use to transport liquids, gases and even coarse solids, such as slurries. HDPE is usually the first choice because it is flexible and can withstand the ground motions that occur during earthquakes and soil movement. McElroy designed its first fusion splicer in 1969. Since then, the company's product portfolio has expanded from 0.5 inch copper tube size (CTS) to 2,000 mm pipe size, which is the most comprehensive product line of all welding equipment manufacturers. Fusion equipment is available in a variety of models, from rolling and crawler models to car-only models to meet specific site requirements. The creation of McElroy TracStar® in the late 1990s was inspired by the needs of the mining industry to create the world's first independent, self-propelled crawler machine. Users benefit from the mobility and hydraulic assistance of their key functions, requiring less manpower and increasing their productivity. In 2013, McElroy began to adopt a new design to meet the challenge of large diameters, as pipes were increasingly used to 2000 mm. Talon™ 2000 is a self-propelled machine with a jaw design that can automatically load the pipe from the ground, position it for fusion, and move it from one joint to another in the pipe. The new method of processing pipes is called assembly line, which provides a safer and more effective method of fusing large pipes. Productivity optimization accessories McElroy believes in providing solutions to problems; therefore, in addition to fusion splicers, McElroy also provides a variety of accessories and productivity tools that can significantly improve field efficiency. Examples include its pipe racks and low profile rollers, as well as PolyHorse® and MegaMc® PolyHorse pipe handling systems, which consist of a series of adjustable brackets to store and help move and align pipes on the job site. These adjustable shelves provide a less hazardous environment for handling tube bundles and reduce labor costs while increasing productivity on the job site. Quality assurance quality testing and quality assurance of fusion equipment can bring huge benefits to any construction site. McElroy DataLogger® enables the operator to log the parameters of the pipeline fusion process to determine if the correct procedures have been followed. Data elements such as time, temperature and pressure are recorded on this rugged tablet. The latest DataLogger also allows operators to scan data and capture photos and GPS coordinates. DataLogger can be used in conjunction with Vault™, which is a web-based secure server that can store fusion joint data. This allows users to access their joints from any location and use various analysis tools via internet access. For quality testing, there are multiple options. McElroy's Guided Side Bend Tester and In Field® Tensile Tester are two such tools that allow for qualitative testing in the field to ensure that the joint meets the appropriate standards. If laboratory type testing is required, McElroy also provides McSnapper® to destructively test impact resistance. Operator training courses McElroy University provides training in a variety of ways. Training is provided at its factory in Tulsa, Oklahoma through certified instructors across the United States, online courses, and on-site customized training based on customer requirements. Courses include operator qualification, troubleshooting and reconstruction, and inspector training. Each lesson includes a combination of classroom and practical lessons, followed by after-school tests to ensure that students understand the correct concepts and procedures. Students who successfully pass the test will obtain the McElroy University Operator Qualification, which is valid for two years. For more information about McElroy equipment, please visit www.mcelroy.com. White paper McElroy Optimized Cooling™ During the fusion process, the most important time for each joint is attributed to the cooling procedure. Press release MINEXPO 2021 We are looking forward to seeing you in less than a week! Products and services TracStar® iSeries-Fusion's evolution The next generation of TracStar® machines provide the industry with a sophisticated, robust and efficient fusion machine. August 19, 2021 Company link www.mcelroy.com TracStar® iSeries DataLogger® 7 Facebook Linkedin Twitter Instagram Youtube Pit Bull® 26 Fusion Machine is designed for trenches. February 19, 2019 Rolling 28 Fusion Machine has been the standard since 1975. On February 19, 2019, Acrobat™ 180 is used for butt welding applications to flexibly meet the needs of any work site. On February 19, 2019, the Pit Bull® 28 compact fusion machine was built specifically for trenches. On February 19, 2019, TracStar® 28 Series 2 Pipe Welding Machine was the first on site. February 19, 2019 The Revolutionary Talon™ 2000 Talon 2000 is a self-propelled vehicle with a unique ability to safely hoist the pipe from the ground, position it for fusion, and move it from the joint to the Connector. March 15, 2021 TracStar® iSeries – Evolution of Fusion The next-generation TracStar® machine provides the industry with a sophisticated, robust and efficient fusion machine. August 19, 2021 TracStar iSeries features and advantages August 23, 2021 McElroy manufacturing, episode 1-Talon stepped into McElroy's "machine and mechanical world", we learned about Talon-this machine completely subverts tradition Fusion equipment. On February 4, 2021, McElroy® Talon™ 2000 McElroy introduced Talon™ 2000-for fusion of 54-inch OD to 2000 mm OD pipes. March 29, 2016 McElroy® Talon™ 2000 – For fusion of 54in OD to 2,000mm OD tubes May 17, 2016 McElroy Optimized Cooling™ During the fusion process, the most important time for each joint is attributed to the cooling process . March 15, 2021 High-density polyethylene piping system Pipes made of polyethylene are a cost-effective solution to various piping problems in municipal, industrial, marine, mining, landfill, pipeline and agricultural applications. On September 16, 2020, polyethylene plays a vital role in protection. For most people, water has never been a problem until they turn on the tap and nothing comes out. On April 23, 2020, MINEXPO 2021 has less than a week to look forward to seeing you! On September 8, 2021, McElroy University launched new courses and a new webpage. McElroy University provides a wide range of training to meet the needs of the entire industry. On August 19, 2021, McElroy holds a webinar on the future of plastic pipe integration. Learn about McElroy’s new TracStar® i series, and the MCU inspector qualification course on May 4, 2021 is now available online and on-demand, without booking a flight, providing inspections Qualification courses are now available exclusively online through McElroy University. On March 15, 2021, McElroy launched the new Tracstar iSeries Fusion Splicer McElroy built on the traditional success of TracStar® and launched the TracStar iSeries, bringing a new level of performance and reliability to the pipeline fusion splicing industry. On March 12, 2021, McElroy appointed Vikrant Sanglikar as the new country head of the India office. McElroy, a leading manufacturer of pipe fusion machines used in the construction of thermoplastic pipes worldwide, is pleased to announce that Vikrant B Sanglikar will join the team as the new country The director is its India office. January 28, 2021 INFUSION 2020: New products are popular This year's INFUSION showcased two dazzling stars in the form of virtual events-the new TracStar® iSeries and DataLogger® 7. On October 16, 2020 McElroy DataLogger® 7: A powerful new tablet with a battery life of more than 14 hours. McElroy has made progress in battery technology, processing power and integration capabilities by releasing the new DataLogger 7. More integration on October 9, 2020, more natural gas Shell announced in October 2018 its plan to develop more onshore natural gas fields in Queensland, Australia. New DataLogger® 6 and Vault™ FAQ on September 16, 2020 We have added a useful new DataLogger and Vault FAQ section to our website. These how-to guides solve some of the most common problems and explain the new features of the two platforms. On April 23, 2020, McElroy University’s new online learning series is now available at McElroy University, and learning is endless. For a limited time, you can still directly receive training from fusion experts through our new online learning series! Stress test on April 16, 2020-DataLogger 6 now available on DataLogger® 6 now provides a guided workflow for recording the details of the stress test and a digital diagram of the process. On March 24, 2020, DataLogger® 6 update 1.15 provides breakthrough features McElroy brings productivity improvements and exciting new features to DataLogger 6, enabling users to record and analyze more work sites. The long-distance product display on Infusion19 on March 17, 2020 The biggest star of INFUSION19 is the machine! Guests who come to Tulsa for a three-day peace, love and integration have the opportunity to contact, see and interact with more types of polyethylene and polypropylene products at this year's product exhibition. October 16, 2019 Use McElroy Sidewinder to easily achieve saddle fusion. When it comes to sidewall fusion, there is no tool better than McElroy Sidewinder for the job. McElroy focuses on TracStar 1200 on September 26, 2019. McElroy is the largest machine in the TracStar series and has everything an operator needs to efficiently fuse 16in OD to 48in OD (450mm to 1200) pipes. On August 20, 2019, McElroy announced the 2019-2020 trade show schedule. McElroy designs and manufactures various fusion equipment for connecting thermoplastic pipes, such as high-density polyethylene (HDPE), fusible PVC™ and polypropylene. On July 16, 2019, McElroy announced additional DataLogger® functions. McElroy has updated its DataLogger 6 additional functions. Introduced on April 23, 2019 Hornet™ XL Outlet Fusion becomes bigger with Hornet XL. McElroy brought the industry's first integrated polypropylene export fusion tool, with branch sizes ranging from 63 mm to 160 mm, with main sizes of 110 mm and larger. McElroy Upcoming Events on April 16, 2019 Below are upcoming events that will showcase McElroy's solutions. March 26, 2019 Plastic pipe welding brings McElroy machines to the Middle East With the opening of a plastic pipe welding factory in Dubai, McElroy fusion machines have a new home in the Middle East. February 25, 2019 McElroy DataLogger® 6 provides expanded machine options, enhanced graphic displays and more features. McElroy DataLogger® 6 provides expanded data collection functions and exciting new features, and now offers free software updates. February 18, 2019 5 DataLogger® 6 Release provides new functions for manual fusion of data logging functions, improved graphic display and more! November 26, 2018 Machine Focus Product Development Director Jason Lawrence TracStar Series 2 Pipe Welding Machine is a self-propelled vehicle equipped with a 4-claw carriage for butt welding of thermoplastic pipes by applying heat and pressure. On July 9, 2018, McElroy launched the Polygon™ integrated machine for miter, butt and undertaking welding. McElroy is a leading manufacturer of pipe welding equipment. Constructing multifunctional tools and plumbing industry for HVAC. On May 14, 2018, McElroy released the industry's first export welding tool. McElroy designed the first integrated welding tool Hornet™ for the export welding of polypropylene pipes. On June 11, 2017, McElroy’s new QuickCamp™ was delivered to a Canadian construction site. McElroy’s new product called the QuickCamp™ system was recently successfully tested on a Canadian construction site, attracting to go there to witness the unique regional contractors and engineers at work Refuge and pipeline processing system. On March 29, 2016, McElroy added Fortiline to the pipe fusion splicer distributor network. McElroy is a leading manufacturer of high-density polyethylene (HDPE) pipe fusion equipment and is pleased to add Fortiline Waterworks to its growing network of distributors. On November 4, 2015, McElroy added a new fusion splicing equipment distributor in Louisiana. McElroy is pleased to announce the addition of a new distributor to provide services to pipeline fusion splicer customers throughout Louisiana. On October 20, 2015, McElroy released its largest TracStar® TracStar® 1200 for large diameter pipes. The release of TracStar® 1200 brought the largest pipe welding capacity in McElroy's popular self-propelled crawler fusion splicer series to date. On October 4, 2015, McElroy's giant welding locomotive handles 2,000 mm pipe operations. McElroy launched Talon™ 2000, which aims to revolutionize the way large-diameter thermoplastic pipes are constructed. McElroy opened an office in India on March 22, 2015. McElroy is a manufacturer of one of the most widely used thermoplastic fusion machine production lines in the world. It has opened an office and demonstration facility in Bangalore, India, specializing in sales, leasing and technical services. February 19, 2015 Use McElroy's OneFit plug-in to improve work site efficiency McElroy further improved work site efficiency by creating the OneFit™ plug-in. On February 8, 2015, McElroy launched In-Ditch 48. The launch of McElroy In-Ditch 48 brings fusion capabilities to restricted working environments using large diameter pipes. On January 19, 2015, McElroy announced the launch of a new hydraulically adjustable pipe rack. McElroy brings hydraulic functions to the pipe rack lines of its 4 inches to 20 inches (200 mm-500 mm) pipes to help improve the welding site. Align thermoplastic pipes effectively. December 14, 2014 DataLogger® 5 is wireless through instant upload and review. McElroy is pleased to bring wireless capabilities to DataLogger® 5, which enables pipeline fusion operators to upload data to the DataLogger Vault™, where review and review can take place. Analyze real-time information from anywhere in the world. On June 10, 2014, PE Pipeline Alliance held a roadshow in Tulsa to promote solutions to replace aging water infrastructure. Cities across the country are facing the expensive and urgent task of replacing outdated water supply systems. Expensive and overly complex issues that disrupt traffic and disrupt services-the familiar waterline breaks. McElroy added three new distributors on April 6, 2014 McElroy recently announced three new distributors to provide services for domestic and foreign customers from east to west. January 1, 2014 North America PO Box 580550 Tulsa OK 74158-0550 United States 1-918-831-9236 customercare@mcelroy.com www.mcelroy.com TracStar® iSeries DataLogger® 7 Facebook Linkedin Twitter Instagram Youtube Asia, South Australia Pacific Unit 7/2 Panama Street Canning Vale Western Australia 6155 Australia Sergio Arellano-Sales Sergio Yibrin-Technical Center 61 8 94557599 (Sales) 61 8 94557599 (Technical Center) sarellano@mcelroy.com syibrin@mcelroy.com Europe, Middle East 11 Avant Business Centre Third Avenue Milton Keynes MK1 1DR Rafael Quintero, UK – Sales Malcolm Profit – Technical Center 1-918-831-9334 (Sales) 44 (0)1908 372259 (Technical Center) rquintero@mcelroy .com mprofit@mcelroy.com Mexico, Central America and Caribbean PO Box 580550 Tulsa OK 74158-0550 Juan Carlos Quintero 1-918-831-9377 jquintero@mcelroy.com South America Av. La Dehesa 1201. Torre Oriente, Oficina 710. Lo Barnechea Santiago Chile Nayib Joussef 56- 9-8449-1000 njoussef@mcelroy. com Brazil Av. Martini Vitoria Rossi 271 Indaiatuba São Paulo 13347-613 Brazil Dave Hughes dhughes@mcelroy.com India 8/4, Whitley Layout Whitefield Bangalore 560066 India Vikrant Sanglikar 91-80-28454873 vsanglikar Latest news Mining industry robot application buzz: 2021 Robotics mentioned in the second quarter increased by 93%. November 16, 2021 Commodity IG Lithium seeks a partner for the US brine lithium project. November 16, 2021 HSE A dangerous precedent: the new phase of Australian mining company is now issued 16 2021 November 16, 2021, the United States Geological Survey adds nickel and zinc to the list of key minerals. November 16, 2021

Company Details Product and Service Video White Paper Project Press Release Regional Office For more than 60 years, McElroy has been committed to providing innovative and high-quality products and services. McElroy designed and manufactured a series of fusion equipment for joining thermoplastic pipes including high-density polyethylene (HDPE). The company provides a full set of accessories designed to improve on-site productivity and efficiency. Its commitment to the industry includes passing McElroy University's extensive training program to ensure that operators and inspectors develop best practices in the quality and reliability of fused piping systems. The fusion splicer HDPE and hot-melt joints used in the mining industry have played an important role in the mining industry. The combination of non-corrosive thermoplastic pipes and hot melt provides a cleaner solution with no risk of leakage. HDPE can withstand the abrasive acidic water commonly found in mines. The fusion machine heat-welds the surfaces of the two pipes together to form an integral pipe. This eliminates the chance of leakage at the joint. For various reasons, mines all over the world have chosen this combination. McElroy Manufacturing Many times, thermoplastic pipes are put into use to transport liquids, gases and even coarse solids, such as slurries. HDPE is usually the first choice because it is flexible and can withstand the ground motions that occur during earthquakes and soil movement. McElroy designed its first fusion splicer in 1969. Since then, the company's product portfolio has expanded from 0.5 inch copper tube size (CTS) to 2,000 mm pipe size, which is the most comprehensive product line of all welding equipment manufacturers. Fusion equipment is available in a variety of models, from rolling and crawler models to car-only models to meet specific site requirements. The creation of McElroy TracStar® in the late 1990s was inspired by the needs of the mining industry, which created the world's first independent, self-propelled crawler machine. Users benefit from the mobility and hydraulic assistance of their key functions, requiring less manpower and increasing their productivity. In 2013, McElroy began to adopt a new design to meet the challenge of large diameters, as pipes were increasingly used to 2000 mm. Talon™ 2000 is a self-propelled machine with a jaw design that can automatically load the pipe from the ground, position it for fusion, and move it from one joint to another in the pipe. The new method of processing pipes is called assembly line, which provides a safer and more effective method of fusing large pipes. Productivity optimization accessories McElroy believes in providing solutions to problems; therefore, in addition to fusion splicers, McElroy also provides a variety of accessories and productivity tools that can significantly improve field efficiency. Examples include its pipe racks and low profile rollers, as well as PolyHorse® and MegaMc® PolyHorse pipe handling systems, which consist of a series of adjustable brackets to store and help move and align pipes on the job site. These adjustable shelves provide a less hazardous environment for handling tube bundles and reduce labor costs while increasing productivity on the job site. Quality assurance quality testing and quality assurance of fusion equipment can bring huge benefits to any construction site. McElroy DataLogger® enables the operator to log the parameters of the pipeline fusion process to determine if the correct procedures have been followed. Data elements such as time, temperature and pressure are recorded on this rugged tablet. The latest DataLogger also allows operators to scan data and capture photos and GPS coordinates. DataLogger can be used in conjunction with Vault™, which is a web-based secure server that can store fusion joint data. This allows users to access their joints from any location and use various analysis tools via internet access. For quality testing, there are multiple options. McElroy's Guided Side Bend Tester and In Field® Tensile Tester are two such tools that allow for qualitative testing in the field to ensure that the joint meets the appropriate standards. If laboratory type testing is required, McElroy also provides McSnapper® to destructively test impact resistance. Operator training courses McElroy University provides training in a variety of ways. Training is provided at its factory in Tulsa, Oklahoma through certified instructors across the United States, online courses, and on-site customized training based on customer requirements. Courses include operator qualification, troubleshooting and reconstruction, and inspector training. Each lesson includes a combination of classroom and practical lessons, followed by after-school tests to ensure that students understand the correct concepts and procedures. Students who successfully pass the test will obtain the McElroy University Operator Qualification, which is valid for two years. For more information about McElroy equipment, please visit www.mcelroy.com. White paper McElroy Optimized Cooling™ During the fusion process, the most important time for each joint is attributed to the cooling procedure. Press release MINEXPO 2021 We are looking forward to seeing you in less than a week! Products and services TracStar® iSeries-Fusion's evolution The next generation of TracStar® machines provide the industry with a sophisticated, robust and efficient fusion machine. August 19, 2021 Company link www.mcelroy.com TracStar® iSeries DataLogger® 7 Facebook Linkedin Twitter Instagram Youtube Pit Bull® 26 Fusion Machine is designed for trenches. February 19, 2019 Rolling 28 Fusion Machine has been the standard since 1975. On February 19, 2019, Acrobat™ 180 is used for butt welding applications to flexibly meet the needs of any work site. On February 19, 2019, the Pit Bull® 28 compact fusion machine was built specifically for trenches. On February 19, 2019, TracStar® 28 Series 2 Pipe Welding Machine was the first on site. February 19, 2019 The Revolutionary Talon™ 2000 Talon 2000 is a self-propelled vehicle with a unique ability to safely hoist the pipe from the ground, position it for fusion, and move it from the joint to the Connector. March 15, 2021 TracStar® iSeries – Evolution of Fusion The next-generation TracStar® machine provides the industry with a sophisticated, robust and efficient fusion machine. August 19, 2021 TracStar iSeries features and advantages August 23, 2021 McElroy manufacturing, episode 1-Talon stepped into McElroy's "machine and mechanical world", we learned about Talon-this machine completely subverts tradition Fusion equipment. On February 4, 2021, McElroy® Talon™ 2000 McElroy introduced Talon™ 2000-for fusion of 54-inch OD to 2000 mm OD pipes. March 29, 2016 McElroy® Talon™ 2000 – For fusion of 54in OD to 2,000mm OD tubes May 17, 2016 McElroy Optimized Cooling™ During the fusion process, the most important time for each joint is attributed to the cooling process . March 15, 2021 High-density polyethylene piping system Pipes made of polyethylene are a cost-effective solution to various piping problems in municipal, industrial, marine, mining, landfill, pipeline and agricultural applications. On September 16, 2020, polyethylene plays a vital role in protection. For most people, water has never been a problem until they turn on the tap and nothing comes out. On April 23, 2020, MINEXPO 2021 has less than a week to look forward to seeing you! On September 8, 2021, McElroy University launched new courses and a new webpage. McElroy University provides a wide range of training to meet the needs of the entire industry. On August 19, 2021, McElroy holds a webinar on the future of plastic pipe integration. Learn about McElroy’s new TracStar® i series, and the MCU inspector qualification course on May 4, 2021 is now available online and on-demand, without booking a flight, providing inspections Qualification courses are now available exclusively online through McElroy University. On March 15, 2021, McElroy launched the new Tracstar iSeries Fusion Splicer McElroy built on the traditional success of TracStar® and launched the TracStar iSeries, bringing a new level of performance and reliability to the pipeline fusion splicing industry. On March 12, 2021, McElroy appointed Vikrant Sanglikar as the new country head of the India office. McElroy, a leading manufacturer of pipe fusion machines used in the construction of thermoplastic pipes worldwide, is pleased to announce that Vikrant B Sanglikar will join the team as the new country The director is its India office. January 28, 2021 INFUSION 2020: New products are popular This year's INFUSION showcased two dazzling stars in the form of virtual events-the new TracStar® iSeries and DataLogger® 7. On October 16, 2020 McElroy DataLogger® 7: A powerful new tablet with a battery life of more than 14 hours. McElroy released the new DataLogger 7, which has made progress in battery technology, processing power and integration capabilities. More integration on October 9, 2020, more natural gas Shell announced in October 2018 its plan to develop more onshore natural gas fields in Queensland, Australia. New DataLogger® 6 and Vault™ FAQ on September 16, 2020 We have added a useful new DataLogger and Vault FAQ section to our website. These how-to guides solve some of the most common problems and explain the new features of the two platforms. On April 23, 2020, McElroy University’s new online learning series is now available at McElroy University, and learning is endless. For a limited time, you can still directly receive training from fusion experts through our new online learning series! Stress test on April 16, 2020-DataLogger 6 now available on DataLogger® 6 now provides a guided workflow for recording the details of the stress test and a digital diagram of the process. On March 24, 2020, DataLogger® 6 Update 1.15 provides the groundbreaking feature McElroy brings productivity improvements and exciting new features to DataLogger 6, enabling users to record and analyze more work sites. Infusion19's long-distance product display on March 17, 2020 The biggest star of INFUSION19 is the machine! Guests who come to Tulsa for a three-day peace, love and integration have the opportunity to contact, see and interact with more types of polyethylene and polypropylene products at this year's product exhibition. On October 16, 2019, the McElroy Sidewinder was used to easily achieve saddle fusion. In terms of sidewall fusion, there is no tool better than McElroy Sidewinder for this task. McElroy focuses on TracStar 1200 on September 26, 2019. McElroy is the largest machine in the TracStar series and has everything an operator needs to efficiently fuse 16in OD to 48in OD (450mm to 1200) pipes. On August 20, 2019, McElroy announced the 2019-2020 trade show schedule. McElroy designs and manufactures various fusion equipment for connecting thermoplastic pipes, such as high-density polyethylene (HDPE), fusible PVC™ and polypropylene. On July 16, 2019, McElroy announced additional DataLogger® functions. McElroy has updated its DataLogger 6 additional functions. Introduced on April 23, 2019 Hornet™ XL Outlet Fusion becomes bigger with Hornet XL. McElroy brought the industry's first integrated polypropylene export fusion tool, with branch sizes ranging from 63 mm to 160 mm, with main sizes of 110 mm and larger. McElroy Upcoming Events on April 16, 2019 Below are upcoming events that will showcase McElroy's solutions. March 26, 2019 Plastic pipe welding brings McElroy machines to the Middle East With the opening of a plastic pipe welding factory in Dubai, McElroy fusion machines have a new home in the Middle East. February 25, 2019 McElroy DataLogger® 6 provides expanded machine options, enhanced graphic displays and more features. McElroy DataLogger® 6 provides expanded data collection functions and exciting new features, and now offers free software updates. February 18, 2019 5 DataLogger® 6 Release provides new functions for manual fusion of data logging functions, improved graphic display and more! November 26, 2018 Machine Focus Product Development Director Jason Lawrence TracStar Series 2 Pipe Welding Machine is a self-propelled vehicle equipped with a 4-claw carriage for butt welding of thermoplastic pipes by applying heat and pressure. On July 9, 2018, McElroy launched the Polygon™ integrated machine for miter, butt and undertaking welding. McElroy is a leading manufacturer of pipe welding equipment. Constructing multi-functional tools and pipe industry for HVAC. On May 14, 2018, McElroy released the industry's first export welding tool. McElroy designed the first integrated welding tool Hornet™ for the export welding of polypropylene pipes. On June 11, 2017, McElroy’s new QuickCamp™ was delivered to a Canadian construction site. McElroy’s new product called the QuickCamp™ system was recently successfully tested on a Canadian construction site, attracting to go there to witness the unique regional contractors and engineers at work Refuge and pipeline processing system. On March 29, 2016, McElroy added Fortiline to the pipe fusion splicer distributor network. McElroy is a leading manufacturer of high-density polyethylene (HDPE) pipe fusion equipment and is pleased to add Fortiline Waterworks to its growing network of distributors. On November 4, 2015, McElroy added a new fusion splicing equipment distributor in Louisiana. McElroy is pleased to announce the addition of a new distributor to provide services to pipeline fusion splicer customers throughout Louisiana. On October 20, 2015, McElroy released its largest TracStar® TracStar® 1200 for large diameter pipes. The release of TracStar® 1200 brought the largest pipe welding capacity in McElroy's popular self-propelled crawler fusion splicer series to date. On October 4, 2015, McElroy's giant welding locomotive handles 2,000 mm pipe operations. McElroy launched Talon™ 2000, which aims to revolutionize the way large-diameter thermoplastic pipes are constructed. McElroy opened an office in India on March 22, 2015. McElroy is a manufacturer of one of the most widely used thermoplastic fusion machine production lines in the world. It has opened an office and demonstration facility in Bangalore, India, specializing in sales, leasing and technical services. February 19, 2015 Use McElroy's OneFit plug-in to improve work site efficiency McElroy further improved work site efficiency by creating the OneFit™ plug-in. On February 8, 2015, McElroy launched In-Ditch 48. The launch of McElroy In-Ditch 48 brings fusion capabilities to restricted working environments using large diameter pipes. On January 19, 2015, McElroy announced the launch of a new hydraulically adjustable pipe rack. McElroy brings hydraulic functions to the pipe rack lines of its 4 inches to 20 inches (200 mm-500 mm) pipes to help improve the welding site. Align thermoplastic pipes effectively. December 14, 2014 DataLogger® 5 is wireless through instant upload and review. McElroy is pleased to bring wireless capabilities to DataLogger® 5, which enables pipeline fusion operators to upload data to the DataLogger Vault™, where review and review can take place. Analyze real-time information from anywhere in the world. On June 10, 2014, PE Pipeline Alliance held a roadshow in Tulsa to promote solutions to replace aging water infrastructure. Cities across the country are facing the expensive and urgent task of replacing outdated water supply systems. Expensive and overly complex issues that disrupt traffic and disrupt services-the familiar waterline breaks. McElroy added three new distributors on April 6, 2014 McElroy recently announced three new distributors to provide services for domestic and foreign customers from east to west. January 1, 2014 North America PO Box 580550 Tulsa OK 74158-0550 United States 1-918-831-9236 customercare@mcelroy.com www.mcelroy.com TracStar® iSeries DataLogger® 7 Facebook Linkedin Twitter Instagram Youtube Asia, South Australia Pacific Unit 7/2 Panama Street Canning Vale Western Australia 6155 Australia Sergio Arellano-Sales Sergio Yibrin-Technical Center 61 8 94557599 (Sales) 61 8 94557599 (Technical Center) sarellano@mcelroy.com syibrin@mcelroy.com Europe, Middle East 11 Avant Business Centre Third Avenue Milton Keynes MK1 1DR Rafael Quintero, UK – Sales Malcolm Profit – Technical Center 1-918-831-9334 (Sales) 44 (0)1908 372259 (Technical Center) rquintero@mcelroy .com mprofit@mcelroy.com Mexico, Central America and Caribbean PO Box 580550 Tulsa OK 74158-0550 Juan Carlos Quintero 1-918-831-9377 jquintero@mcelroy.com South America Av. La Dehesa 1201. Torre Oriente, Oficina 710. Lo Barnechea Santiago Chile Nayib Joussef 56- 9-8449-1000 njoussef@mcelroy. com Brazil Av. Martini Vitoria Rossi 271 Indaiatuba São Paulo 13347-613 Brazil Dave Hughes dhughes@mcelroy.com India 8/4, Whitley Layout Whitefield Bangalore 560066 India Vikrant Sanglikar 91-80-28454873 vsanglikar Latest news Mining industry robot application buzz: 2021 Robotics mentioned in the second quarter increased by 93%. November 16, 2021 Commodity IG Lithium seeks a partner for the US brine lithium project. November 16, 2021 HSE A dangerous precedent: the new phase of Australian mining company is now issued 16 2021 November 16, 2021, the United States Geological Survey adds nickel and zinc to the list of key minerals. November 16, 2021

Company Details Product and Service Video White Paper Project Press Release Regional Office For more than 60 years, McElroy has been committed to providing innovative and high-quality products and services. McElroy designed and manufactured a series of fusion equipment for joining thermoplastic pipes including high-density polyethylene (HDPE). The company provides a full set of accessories designed to improve on-site productivity and efficiency. Its commitment to the industry includes passing McElroy University's extensive training program to ensure that operators and inspectors develop best practices in the quality and reliability of fused piping systems. The fusion splicer HDPE and hot-melt joints used in the mining industry have played an important role in the mining industry. The combination of non-corrosive thermoplastic pipes and hot melt provides a cleaner solution with no risk of leakage. HDPE can withstand the abrasive acidic water commonly found in mines. The fusion machine heat-welds the surfaces of the two pipes together to form an integral pipe. This eliminates the chance of leakage at the joint. For various reasons, mines all over the world have chosen this combination. McElroy Manufacturing Many times, thermoplastic pipes are put into use to transport liquids, gases and even coarse solids, such as slurries. HDPE is usually the first choice because it is flexible and can withstand the ground motions that occur during earthquakes and soil movement. McElroy designed its first fusion splicer in 1969. Since then, the company's product portfolio has expanded from 0.5 inch copper tube size (CTS) to 2,000 mm pipe size, which is the most comprehensive product line of all welding equipment manufacturers. Fusion equipment is available in a variety of models, from rolling and crawler models to car-only models to meet specific site requirements. The creation of McElroy TracStar® in the late 1990s was inspired by the needs of the mining industry to create the world's first independent, self-propelled crawler machine. Users benefit from the mobility and hydraulic assistance of their key functions, requiring less manpower and increasing their productivity. In 2013, McElroy began to adopt a new design to meet the challenge of large diameters, as pipes were increasingly used to 2000 mm. Talon™ 2000 is a self-propelled machine with a jaw design that can automatically load the pipe from the ground, position it for fusion, and move it from one joint to another in the pipe. The new method of processing pipes is called assembly line, which provides a safer and more effective method of fusing large pipes. Productivity optimization accessories McElroy believes in providing solutions to problems; therefore, in addition to fusion splicers, McElroy also provides a variety of accessories and productivity tools that can significantly improve field efficiency. Examples include its pipe racks and low profile rollers, as well as PolyHorse® and MegaMc® PolyHorse pipe handling systems, which consist of a series of adjustable brackets to store and help move and align pipes on the job site. These adjustable shelves provide a less hazardous environment for handling tube bundles and reduce labor costs while increasing productivity on the job site. Quality assurance quality testing and quality assurance of fusion equipment can bring huge benefits to any construction site. McElroy DataLogger® enables the operator to log the parameters of the pipeline fusion process to determine if the correct procedures have been followed. Data elements such as time, temperature and pressure are recorded on this rugged tablet. The latest DataLogger also allows operators to scan data and capture photos and GPS coordinates. DataLogger can be used in conjunction with Vault™, which is a web-based secure server that can store fusion joint data. This allows users to access their joints from any location and use various analysis tools via internet access. For quality testing, there are multiple options. McElroy's Guided Side Bend Tester and In Field® Tensile Tester are two such tools that allow for qualitative testing in the field to ensure that the joint meets the appropriate standards. If laboratory type testing is required, McElroy also provides McSnapper® to destructively test impact resistance. Operator training courses McElroy University provides training in a variety of ways. Training is provided at its factory in Tulsa, Oklahoma through certified instructors across the United States, online courses, and on-site customized training based on customer requirements. Courses include operator qualification, troubleshooting and reconstruction, and inspector training. Each lesson includes a combination of classroom and practical lessons, followed by after-school tests to ensure that students understand the correct concepts and procedures. Students who successfully pass the test will obtain the McElroy University Operator Qualification, which is valid for two years. For more information about McElroy equipment, please visit www.mcelroy.com. White paper McElroy Optimized Cooling™ During the fusion process, the most important time for each joint is attributed to the cooling procedure. Press release MINEXPO 2021 We are looking forward to seeing you in less than a week! Products and services TracStar® iSeries-Fusion's evolution The next generation of TracStar® machines provide the industry with a sophisticated, robust and efficient fusion machine. August 19, 2021 Company link www.mcelroy.com TracStar® iSeries DataLogger® 7 Facebook Linkedin Twitter Instagram Youtube Pit Bull® 26 Fusion Machine is designed for trenches. February 19, 2019 Rolling 28 Fusion Machine has been the standard since 1975. On February 19, 2019, Acrobat™ 180 is used for butt welding applications to flexibly meet the needs of any work site. On February 19, 2019, the Pit Bull® 28 compact fusion machine was built specifically for trenches. On February 19, 2019, TracStar® 28 Series 2 Pipe Welding Machine was the first on site. February 19, 2019 The Revolutionary Talon™ 2000 Talon 2000 is a self-propelled vehicle with a unique ability to safely hoist the pipe from the ground, position it for fusion, and move it from the joint to the Connector. March 15, 2021 TracStar® iSeries – Evolution of Fusion The next-generation TracStar® machine provides the industry with a sophisticated, robust and efficient fusion machine. August 19, 2021 TracStar iSeries features and advantages August 23, 2021 McElroy manufacturing, episode 1-Talon stepped into McElroy's "machine and mechanical world", we learned about Talon-this machine completely subverts tradition Fusion equipment. On February 4, 2021, McElroy® Talon™ 2000 McElroy introduced Talon™ 2000-for fusion of 54-inch OD to 2000 mm OD pipes. March 29, 2016 McElroy® Talon™ 2000 – For fusion of 54in OD to 2,000mm OD tubes May 17, 2016 McElroy Optimized Cooling™ During the fusion process, the most important time for each joint is attributed to the cooling process . March 15, 2021 High-density polyethylene piping system Pipes made of polyethylene are a cost-effective solution to various piping problems in municipal, industrial, marine, mining, landfill, pipeline and agricultural applications. On September 16, 2020, polyethylene plays a vital role in protection. For most people, water has never been a problem until they turn on the tap and nothing comes out. On April 23, 2020, MINEXPO 2021 has less than a week to look forward to seeing you! On September 8, 2021, McElroy University launched new courses and a new webpage. McElroy University provides a wide range of training to meet the needs of the entire industry. On August 19, 2021, McElroy holds a webinar on the future of plastic pipe integration. Learn about McElroy’s new TracStar® i series, and the MCU inspector qualification course on May 4, 2021 is now available online and on-demand, without booking a flight, providing inspections Qualification courses are now available exclusively online through McElroy University. On March 15, 2021, McElroy launched the new Tracstar iSeries Fusion Splicer McElroy built on the traditional success of TracStar® and launched the TracStar iSeries, bringing a new level of performance and reliability to the pipeline fusion splicing industry. On March 12, 2021, McElroy appointed Vikrant Sanglikar as the new country head of the India office. McElroy, a leading manufacturer of pipe fusion machines used in the construction of thermoplastic pipes worldwide, is pleased to announce that Vikrant B Sanglikar will join the team as the new country The director is its India office. January 28, 2021 INFUSION 2020: New products are popular This year's INFUSION showcased two dazzling stars in the form of virtual events-the new TracStar® iSeries and DataLogger® 7. On October 16, 2020 McElroy DataLogger® 7: A powerful new tablet with a battery life of more than 14 hours. McElroy has made progress in battery technology, processing power and integration capabilities by releasing the new DataLogger 7. More integration on October 9, 2020, more natural gas Shell announced in October 2018 its plan to develop more onshore natural gas fields in Queensland, Australia. New DataLogger® 6 and Vault™ FAQ on September 16, 2020 We have added a useful new DataLogger and Vault FAQ section to our website. These how-to guides solve some of the most common problems and explain the new features of the two platforms. On April 23, 2020, McElroy University’s new online learning series is now available at McElroy University, and learning is endless. For a limited time, you can still directly receive training from fusion experts through our new online learning series! Stress test on April 16, 2020-DataLogger 6 now available on DataLogger® 6 now provides a guided workflow for recording the details of the stress test and a digital diagram of the process. On March 24, 2020, DataLogger® 6 update 1.15 provides breakthrough features McElroy brings productivity improvements and exciting new features to DataLogger 6, enabling users to record and analyze more work sites. The long-distance product display on Infusion19 on March 17, 2020 The biggest star of INFUSION19 is the machine! Guests who come to Tulsa for a three-day peace, love and integration have the opportunity to contact, see and interact with more types of polyethylene and polypropylene products at this year's product exhibition. October 16, 2019 Use McElroy Sidewinder to easily achieve saddle fusion. When it comes to sidewall fusion, there is no tool better than McElroy Sidewinder for the job. McElroy focuses on TracStar 1200 on September 26, 2019. McElroy is the largest machine in the TracStar series and has everything an operator needs to efficiently fuse 16in OD to 48in OD (450mm to 1200) pipes. On August 20, 2019, McElroy announced the 2019-2020 trade show schedule. McElroy designs and manufactures various fusion equipment for connecting thermoplastic pipes, such as high-density polyethylene (HDPE), fusible PVC™ and polypropylene. On July 16, 2019, McElroy announced additional DataLogger® functions. McElroy has updated its DataLogger 6 additional functions. Introduced on April 23, 2019 Hornet™ XL Outlet Fusion becomes bigger with Hornet XL. McElroy brought the industry's first integrated polypropylene export fusion tool, with branch sizes ranging from 63 mm to 160 mm, with main sizes of 110 mm and larger. McElroy Upcoming Events on April 16, 2019 Below are upcoming events that will showcase McElroy's solutions. March 26, 2019 Plastic pipe welding brings McElroy machines to the Middle East With the opening of a plastic pipe welding factory in Dubai, McElroy fusion machines have a new home in the Middle East. February 25, 2019 McElroy DataLogger® 6 provides expanded machine options, enhanced graphic displays and more features. McElroy DataLogger® 6 provides expanded data collection functions and exciting new features, and now offers free software updates. February 18, 2019 5 DataLogger® 6 Release provides new functions for manual fusion of data logging functions, improved graphic display and more! November 26, 2018 Machine Focus Product Development Director Jason Lawrence TracStar Series 2 Pipe Welding Machine is a self-propelled vehicle equipped with a 4-claw carriage for butt welding of thermoplastic pipes by applying heat and pressure. On July 9, 2018, McElroy launched the Polygon™ integrated machine for miter, butt and undertaking welding. McElroy is a leading manufacturer of pipe welding equipment. Constructing multi-functional tools and pipe industry for HVAC. On May 14, 2018, McElroy released the industry's first export welding tool. McElroy designed the first integrated welding tool Hornet™ for the export welding of polypropylene pipes. On June 11, 2017, McElroy’s new QuickCamp™ was delivered to a Canadian construction site. McElroy’s new product called the QuickCamp™ system was recently successfully tested on a Canadian construction site, attracting to go there to witness the unique regional contractors and engineers at work Refuge and pipeline processing system. On March 29, 2016, McElroy added Fortiline to the pipe fusion splicer distributor network. McElroy is a leading manufacturer of high-density polyethylene (HDPE) pipe fusion equipment and is pleased to add Fortiline Waterworks to its growing network of distributors. On November 4, 2015, McElroy added a new fusion splicing equipment distributor in Louisiana. McElroy is pleased to announce the addition of a new distributor to provide services to pipeline fusion splicer customers throughout Louisiana. On October 20, 2015, McElroy released its largest TracStar® TracStar® 1200 for large diameter pipes. The release of TracStar® 1200 brought the largest pipe welding capacity in McElroy's popular self-propelled crawler fusion splicer series to date. On October 4, 2015, McElroy's giant welding locomotive handles 2,000 mm pipe operations. McElroy launched Talon™ 2000, which aims to revolutionize the way large-diameter thermoplastic pipes are constructed. McElroy opened an office in India on March 22, 2015. McElroy is a manufacturer of one of the most widely used thermoplastic fusion machine production lines in the world. It has opened an office and demonstration facility in Bangalore, India, specializing in sales, leasing and technical services. February 19, 2015 Use McElroy's OneFit plug-in to improve work site efficiency McElroy further improved work site efficiency by creating the OneFit™ plug-in. On February 8, 2015, McElroy launched In-Ditch 48. The launch of McElroy In-Ditch 48 brings fusion capabilities to restricted working environments using large diameter pipes. On January 19, 2015, McElroy announced the launch of a new hydraulically adjustable pipe rack. McElroy brings hydraulic functions to the pipe rack lines of its 4 inches to 20 inches (200 mm-500 mm) pipes to help improve the welding site. Align thermoplastic pipes effectively. December 14, 2014 DataLogger® 5 is wireless through instant upload and review. McElroy is pleased to bring wireless capabilities to DataLogger® 5, which enables pipeline fusion operators to upload data to the DataLogger Vault™, where review and review can take place. Analyze real-time information from anywhere in the world. On June 10, 2014, PE Pipeline Alliance held a roadshow in Tulsa to promote solutions to replace aging water infrastructure. Cities across the country are facing the expensive and urgent task of replacing outdated water supply systems. Expensive and overly complex issues that disrupt traffic and disrupt services-the familiar waterline breaks. McElroy added three new distributors on April 6, 2014 McElroy recently announced three new distributors to provide services for domestic and foreign customers from east to west. January 1, 2014 North America PO Box 580550 Tulsa OK 74158-0550 United States 1-918-831-9236 customercare@mcelroy.com www.mcelroy.com TracStar® iSeries DataLogger® 7 Facebook Linkedin Twitter Instagram Youtube Asia, South Australia Pacific Unit 7/2 Panama Street Canning Vale Western Australia 6155 Australia Sergio Arellano-Sales Sergio Yibrin-Technical Center 61 8 94557599 (Sales) 61 8 94557599 (Technical Center) sarellano@mcelroy.com syibrin@mcelroy.com Europe, Middle East 11 Avant Business Centre Third Avenue Milton Keynes MK1 1DR Rafael Quintero, UK – Sales Malcolm Profit – Technical Center 1-918-831-9334 (Sales) 44 (0)1908 372259 (Technical Center) rquintero@mcelroy .com mprofit@mcelroy.com Mexico, Central America and Caribbean PO Box 580550 Tulsa OK 74158-0550 Juan Carlos Quintero 1-918-831-9377 jquintero@mcelroy.com South America Av. La Dehesa 1201. Torre Oriente, Oficina 710. Lo Barnechea Santiago Chile Nayib Joussef 56- 9-8449-1000 njoussef@mcelroy.com Brasil Av.Martini Vitoria Rossi 271 Indaiatuba São Paulo 13347-613 Brazil Dave Hughes dhughes@mcelroy.com India 8/4, Whitley Layout Whitefield Bangalore 560 066 India Vikrant Sanglikar 91-80-28454873 vsanglikar Latest news: Robotic applications in the mining industry are buzzing: mentions of robotics in the second quarter of 2021 increased by 93%. November 16, 2021 commodity IG Lithium seeks US brine lithium project Partners November 16, 2021 HSE A dangerous precedent: A new phase of Australian mining company is now available November 16, 2021 Commodity US Geological Survey adds nickel and zinc to the list of key minerals November 16, 2021

Company Details Product and Service Video White Paper Project Press Release Regional Office For more than 60 years, McElroy has been committed to providing innovative and high-quality products and services. McElroy designed and manufactured a series of fusion equipment for joining thermoplastic pipes including high-density polyethylene (HDPE). The company provides a full set of accessories designed to improve on-site productivity and efficiency. Its commitment to the industry includes passing McElroy University's extensive training program to ensure that operators and inspectors develop best practices in the quality and reliability of fused piping systems. The fusion splicer HDPE and hot-melt joints used in the mining industry have played an important role in the mining industry. The combination of non-corrosive thermoplastic pipes and hot melt provides a cleaner solution with no risk of leakage. HDPE can withstand the abrasive acidic water commonly found in mines. The fusion machine heat-welds the surfaces of the two pipes together to form an integral pipe. This eliminates the chance of leakage at the joint. For various reasons, mines all over the world have chosen this combination. McElroy Manufacturing Many times, thermoplastic pipes are put into use to transport liquids, gases and even coarse solids, such as slurries. HDPE is usually the first choice because it is flexible and can withstand the ground motions that occur during earthquakes and soil movement. McElroy designed its first fusion splicer in 1969. Since then, the company's product portfolio has expanded from 0.5 inch copper tube size (CTS) to 2,000 mm pipe size, which is the most comprehensive product line of all welding equipment manufacturers. Fusion equipment is available in a variety of models, from rolling and crawler models to car-only models to meet specific site requirements. The creation of McElroy TracStar® in the late 1990s was inspired by the needs of the mining industry, which created the world's first independent, self-propelled crawler machine. Users benefit from the mobility and hydraulic assistance of their key functions, requiring less manpower and increasing their productivity. In 2013, McElroy began to adopt a new design to meet the challenge of large diameters, as pipes were increasingly used to 2000 mm. Talon™ 2000 is a self-propelled machine with a jaw design that can automatically load the pipe from the ground, position it for fusion, and move it from one joint to another in the pipe. The new method of processing pipes is called assembly line, which provides a safer and more effective method of fusing large pipes. Productivity optimization accessories McElroy believes in providing solutions to problems; therefore, in addition to fusion splicers, McElroy also provides a variety of accessories and productivity tools that can significantly improve field efficiency. Examples include its pipe racks and low profile rollers, as well as PolyHorse® and MegaMc® PolyHorse pipe handling systems, which consist of a series of adjustable brackets to store and help move and align pipes on the job site. These adjustable shelves provide a less hazardous environment for handling tube bundles and reduce labor costs while increasing productivity on the job site. Quality assurance quality testing and quality assurance of fusion equipment can bring huge benefits to any construction site. McElroy DataLogger® enables the operator to log the parameters of the pipeline fusion process to determine if the correct procedures have been followed. Data elements such as time, temperature and pressure are recorded on this rugged tablet. The latest DataLogger also allows operators to scan data and capture photos and GPS coordinates. DataLogger can be used in conjunction with Vault™, which is a web-based secure server that can store fusion joint data. This allows users to access their joints from any location and use various analysis tools via internet access. For quality testing, there are multiple options. McElroy's Guided Side Bend Tester and In Field® Tensile Tester are two such tools that allow for qualitative testing in the field to ensure that the joint meets the appropriate standards. If laboratory type testing is required, McElroy also provides McSnapper® to destructively test impact resistance. Operator training courses McElroy University provides training in a variety of ways. Training is provided at its factory in Tulsa, Oklahoma through certified instructors across the United States, online courses, and on-site customized training based on customer requirements. Courses include operator qualification, troubleshooting and reconstruction, and inspector training. Each lesson includes a combination of classroom and practical lessons, followed by after-school tests to ensure that students understand the correct concepts and procedures. Students who successfully pass the test will obtain the McElroy University Operator Qualification, which is valid for two years. For more information about McElroy equipment, please visit www.mcelroy.com. White paper McElroy Optimized Cooling™ During the fusion process, the most important time for each joint is attributed to the cooling procedure. Press release MINEXPO 2021 We are looking forward to seeing you in less than a week! Products and services TracStar® iSeries-Fusion's evolution The next generation of TracStar® machines provide the industry with a sophisticated, robust and efficient fusion machine. August 19, 2021 Company link www.mcelroy.com TracStar® iSeries DataLogger® 7 Facebook Linkedin Twitter Instagram Youtube Pit Bull® 26 Fusion Machine is designed for trenches. February 19, 2019 Rolling 28 Fusion Machine has been the standard since 1975. On February 19, 2019, Acrobat™ 180 is used for butt welding applications to flexibly meet the needs of any work site. On February 19, 2019, the Pit Bull® 28 compact fusion machine was built specifically for trenches. On February 19, 2019, TracStar® 28 Series 2 Pipe Welding Machine was the first on site. February 19, 2019 The Revolutionary Talon™ 2000 Talon 2000 is a self-propelled vehicle with a unique ability to safely hoist the pipe from the ground, position it for fusion, and move it from the joint to the Connector. March 15, 2021 TracStar® iSeries – Evolution of Fusion The next-generation TracStar® machine provides the industry with a sophisticated, robust and efficient fusion machine. August 19, 2021 TracStar iSeries features and advantages August 23, 2021 McElroy manufacturing, episode 1-Talon stepped into McElroy's "machine and mechanical world", we learned about Talon-this machine completely subverts tradition Fusion equipment. On February 4, 2021, McElroy® Talon™ 2000 McElroy introduced Talon™ 2000-for fusion of 54-inch OD to 2000 mm OD pipes. March 29, 2016 McElroy® Talon™ 2000 – For fusion of 54in OD to 2,000mm OD tubes May 17, 2016 McElroy Optimized Cooling™ During the fusion process, the most important time for each joint is attributed to the cooling process . March 15, 2021 High-density polyethylene piping system Pipes made of polyethylene are a cost-effective solution to various piping problems in municipal, industrial, marine, mining, landfill, pipeline and agricultural applications. On September 16, 2020, polyethylene plays a vital role in protection. For most people, water has never been a problem until they turn on the tap and nothing comes out. On April 23, 2020, MINEXPO 2021 has less than a week to look forward to seeing you! On September 8, 2021, McElroy University launched new courses and a new webpage. McElroy University provides a wide range of training to meet the needs of the entire industry. On August 19, 2021, McElroy holds a webinar on the future of plastic pipe integration. Learn about McElroy’s new TracStar® i series, and the MCU inspector qualification course on May 4, 2021 is now available online and on-demand, without booking a flight, providing inspections Qualification courses are now available exclusively online through McElroy University. On March 15, 2021, McElroy launched the new Tracstar iSeries Fusion Splicer McElroy built on the traditional success of TracStar® and launched the TracStar iSeries, bringing a new level of performance and reliability to the pipeline fusion splicing industry. On March 12, 2021, McElroy appointed Vikrant Sanglikar as the new country head of the India office. McElroy, a leading manufacturer of pipe fusion machines used in the construction of thermoplastic pipes worldwide, is pleased to announce that Vikrant B Sanglikar will join the team as the new country The director is its India office. January 28, 2021 INFUSION 2020: New products are popular This year's INFUSION showcased two dazzling stars in the form of virtual events-the new TracStar® iSeries and DataLogger® 7. On October 16, 2020 McElroy DataLogger® 7: A powerful new tablet with a battery life of more than 14 hours. McElroy released the new DataLogger 7, which has made progress in battery technology, processing power and integration capabilities. More integration on October 9, 2020, more natural gas Shell announced in October 2018 its plan to develop more onshore natural gas fields in Queensland, Australia. New DataLogger® 6 and Vault™ FAQ on September 16, 2020 We have added a useful new DataLogger and Vault FAQ section to our website. These how-to guides solve some of the most common problems and explain the new features of the two platforms. On April 23, 2020, McElroy University’s new online learning series is now available at McElroy University, and learning is endless. For a limited time, you can still directly receive training from fusion experts through our new online learning series! Stress test on April 16, 2020-DataLogger 6 now available on DataLogger® 6 now provides a guided workflow for recording the details of the stress test and a digital diagram of the process. On March 24, 2020, DataLogger® 6 Update 1.15 provides the groundbreaking feature McElroy brings productivity improvements and exciting new features to DataLogger 6, enabling users to record and analyze more work sites. Infusion19's long-distance product display on March 17, 2020 The biggest star of INFUSION19 is the machine! Guests who come to Tulsa for a three-day peace, love and integration have the opportunity to contact, see and interact with more types of polyethylene and polypropylene products at this year's product exhibition. On October 16, 2019, the McElroy Sidewinder was used to easily achieve saddle fusion. In terms of sidewall fusion, there is no tool better than McElroy Sidewinder for this task. McElroy focuses on TracStar 1200 on September 26, 2019. McElroy is the largest machine in the TracStar series and has everything an operator needs to efficiently fuse 16in OD to 48in OD (450mm to 1200) pipes. On August 20, 2019, McElroy announced the 2019-2020 trade show schedule. McElroy designs and manufactures various fusion equipment for connecting thermoplastic pipes, such as high-density polyethylene (HDPE), fusible PVC™ and polypropylene. On July 16, 2019, McElroy announced additional DataLogger® functions. McElroy has updated its DataLogger 6 additional functions. Introduced on April 23, 2019 Hornet™ XL Outlet Fusion becomes bigger with Hornet XL. McElroy brought the industry's first integrated polypropylene export fusion tool, with branch sizes ranging from 63 mm to 160 mm, with main sizes of 110 mm and larger. McElroy Upcoming Events on April 16, 2019 Below are upcoming events that will showcase McElroy's solutions. March 26, 2019 Plastic pipe welding brings McElroy machines to the Middle East With the opening of a plastic pipe welding factory in Dubai, McElroy fusion machines have a new home in the Middle East. February 25, 2019 McElroy DataLogger® 6 provides expanded machine options, enhanced graphic displays and more features. McElroy DataLogger® 6 provides expanded data collection functions and exciting new features, and now offers free software updates. February 18, 2019 5 DataLogger® 6 Release provides new functions for manual fusion of data logging functions, improved graphic display and more! November 26, 2018 Machine Focus Product Development Director Jason Lawrence TracStar Series 2 Pipe Welding Machine is a self-propelled vehicle equipped with a 4-claw carriage for butt welding of thermoplastic pipes by applying heat and pressure. On July 9, 2018, McElroy launched the Polygon™ integrated machine for miter, butt and undertaking welding. McElroy is a leading manufacturer of pipe welding equipment. Constructing multifunctional tools and plumbing industry for HVAC. On May 14, 2018, McElroy released the industry's first export welding tool. McElroy designed the first integrated welding tool Hornet™ for the export welding of polypropylene pipes. On June 11, 2017, McElroy’s new QuickCamp™ was delivered to a Canadian construction site. McElroy’s new product called the QuickCamp™ system was recently successfully tested on a Canadian construction site, attracting to go there to witness the unique regional contractors and engineers at work Refuge and pipeline processing system. On March 29, 2016, McElroy added Fortiline to the pipe fusion splicer distributor network. McElroy is a leading manufacturer of high-density polyethylene (HDPE) pipe fusion equipment and is pleased to add Fortiline Waterworks to its growing network of distributors. On November 4, 2015, McElroy added a new fusion splicing equipment distributor in Louisiana. McElroy is pleased to announce the addition of a new distributor to provide services to pipeline fusion splicer customers throughout Louisiana. On October 20, 2015, McElroy released its largest TracStar® TracStar® 1200 for large diameter pipes. The release of TracStar® 1200 brought the largest pipe welding capacity in McElroy's popular self-propelled crawler fusion splicer series to date. On October 4, 2015, McElroy's giant welding locomotive handles 2,000 mm pipe operations. McElroy launched Talon™ 2000, which aims to revolutionize the way large-diameter thermoplastic pipes are constructed. McElroy opened an office in India on March 22, 2015. McElroy is a manufacturer of one of the most widely used thermoplastic fusion machine production lines in the world. It has opened an office and demonstration facility in Bangalore, India, specializing in sales, leasing and technical services. February 19, 2015 Use McElroy's OneFit plug-in to improve work site efficiency McElroy further improved work site efficiency by creating the OneFit™ plug-in. On February 8, 2015, McElroy launched In-Ditch 48. The launch of McElroy In-Ditch 48 brings fusion capabilities to restricted working environments using large diameter pipes. On January 19, 2015, McElroy announced the launch of a new hydraulically adjustable pipe rack. McElroy brings hydraulic functions to the pipe rack lines of its 4 inches to 20 inches (200 mm-500 mm) pipes to help improve the welding site. Align thermoplastic pipes effectively. December 14, 2014 DataLogger® 5 is wireless through instant upload and review. McElroy is pleased to bring wireless capabilities to DataLogger® 5, which enables pipeline fusion operators to upload data to the DataLogger Vault™, where review and review can take place. Analyze real-time information from anywhere in the world. On June 10, 2014, PE Pipeline Alliance held a roadshow in Tulsa to promote solutions to replace aging water infrastructure. Cities across the country are facing the expensive and urgent task of replacing outdated water supply systems. Expensive and overly complex issues that disrupt traffic and disrupt services-the familiar waterline breaks. McElroy added three new distributors on April 6, 2014 McElroy recently announced three new distributors to provide services for domestic and foreign customers from east to west. January 1, 2014 North America PO Box 580550 Tulsa OK 74158-0550 United States 1-918-831-9236 customercare@mcelroy.com www.mcelroy.com TracStar® iSeries DataLogger® 7 Facebook Linkedin Twitter Instagram Youtube Asia, South Australia Pacific Unit 7/2 Panama Street Canning Vale Western Australia 6155 Australia Sergio Arellano-Sales Sergio Yibrin-Technical Center 61 8 94557599 (Sales) 61 8 94557599 (Technical Center) sarellano@mcelroy.com syibrin@mcelroy.com Europe, Middle East 11 Avant Business Centre Third Avenue Milton Keynes MK1 1DR Rafael Quintero, UK – Sales Malcolm Profit – Technical Center 1-918-831-9334 (Sales) 44 (0)1908 372259 (Technical Center) rquintero@mcelroy .com mprofit@mcelroy.com Mexico, Central America and Caribbean PO Box 580550 Tulsa OK 74158-0550 Juan Carlos Quintero 1-918-831-9377 jquintero@mcelroy.com South America Av. La Dehesa 1201. Torre Oriente, Oficina 710. Lo Barnechea Santiago Chile Nayib Joussef 56- 9-8449-1000 njoussef@mcelroy.com Brasil Av.Martini Vitoria Rossi 271 Indaiatuba São Paulo 13347-613 Brazil Dave Hughes dhughes@mcelroy.com India 8/4, Whitley Layout Whitefield Bangalore 560 066 India Vikrant Sanglikar 91-80-28454873 vsanglikar Latest news: Robotic applications in the mining industry are buzzing: mentions of robotics in the second quarter of 2021 increased by 93%. November 16, 2021 commodity IG Lithium seeks US brine lithium project Partners November 16, 2021 HSE A dangerous precedent: A new phase of Australian mining company is now available November 16, 2021 Commodity US Geological Survey adds nickel and zinc to the list of key minerals November 16, 2021

Company Details Product and Service Video White Paper Project Press Release Regional Office For more than 60 years, McElroy has been committed to providing innovative and high-quality products and services. McElroy designed and manufactured a series of fusion equipment for joining thermoplastic pipes including high-density polyethylene (HDPE). The company provides a full set of accessories designed to improve on-site productivity and efficiency. Its commitment to the industry includes passing McElroy University's extensive training program to ensure that operators and inspectors develop best practices in the quality and reliability of fused piping systems. The fusion splicer HDPE and hot-melt joints used in the mining industry have played an important role in the mining industry. The combination of non-corrosive thermoplastic pipes and hot melt provides a cleaner solution with no risk of leakage. HDPE can withstand the abrasive acidic water commonly found in mines. The fusion machine heat-welds the surfaces of the two pipes together to form an integral pipe. This eliminates the chance of leakage at the joint. For various reasons, mines all over the world have chosen this combination. McElroy Manufacturing Many times, thermoplastic pipes are put into use to transport liquids, gases and even coarse solids, such as slurries. HDPE is usually the first choice because it is flexible and can withstand the ground motions that occur during earthquakes and soil movement. McElroy designed its first fusion splicer in 1969. Since then, the company's product portfolio has expanded from 0.5 inch copper tube size (CTS) to 2,000 mm pipe size, which is the most comprehensive product line of all welding equipment manufacturers. Fusion equipment is available in a variety of models, from rolling and crawler models to car-only models to meet specific site requirements. The creation of McElroy TracStar® in the late 1990s was inspired by the needs of the mining industry, which created the world's first independent, self-propelled crawler machine. Users benefit from the mobility and hydraulic assistance of their key functions, requiring less manpower and increasing their productivity. In 2013, McElroy began to adopt a new design to meet the challenge of large diameters, as pipes were increasingly used to 2000 mm. Talon™ 2000 is a self-propelled machine with a jaw design that can automatically load the pipe from the ground, position it for fusion, and move it from one joint to another in the pipe. The new method of processing pipes is called assembly line, which provides a safer and more effective method of fusing large pipes. Productivity optimization accessories McElroy believes in providing solutions to problems; therefore, in addition to fusion splicers, McElroy also provides a variety of accessories and productivity tools that can significantly improve field efficiency. Examples include its pipe racks and low profile rollers, as well as PolyHorse® and MegaMc® PolyHorse pipe handling systems, which consist of a series of adjustable brackets to store and help move and align pipes on the job site. These adjustable shelves provide a less hazardous environment for handling tube bundles and reduce labor costs while increasing productivity on the job site. Quality assurance quality testing and quality assurance of fusion equipment can bring huge benefits to any construction site. McElroy DataLogger® enables the operator to log the parameters of the pipeline fusion process to determine if the correct procedures have been followed. Data elements such as time, temperature and pressure are recorded on this rugged tablet. The latest DataLogger also allows operators to scan data and capture photos and GPS coordinates. DataLogger can be used in conjunction with Vault™, which is a web-based secure server that can store fusion joint data. This allows users to access their joints from any location and use various analysis tools via internet access. For quality testing, there are multiple options. McElroy's Guided Side Bend Tester and In Field® Tensile Tester are two such tools that allow for qualitative testing in the field to ensure that the joint meets the appropriate standards. If laboratory type testing is required, McElroy also provides McSnapper® to destructively test impact resistance. Operator training courses McElroy University provides training in a variety of ways. Training is provided at its factory in Tulsa, Oklahoma through certified instructors across the United States, online courses, and on-site customized training based on customer requirements. Courses include operator qualification, troubleshooting and reconstruction, and inspector training. Each lesson includes a combination of classroom and practical lessons, followed by after-school tests to ensure that students understand the correct concepts and procedures. Students who successfully pass the test will obtain the McElroy University Operator Qualification, which is valid for two years. For more information about McElroy equipment, please visit www.mcelroy.com. White paper McElroy Optimized Cooling™ During the fusion process, the most important time for each joint is attributed to the cooling procedure. Press release MINEXPO 2021 We are looking forward to seeing you in less than a week! Products and services TracStar® iSeries-Fusion's evolution The next generation of TracStar® machines provide the industry with a sophisticated, robust and efficient fusion machine. August 19, 2021 Company link www.mcelroy.com TracStar® iSeries DataLogger® 7 Facebook Linkedin Twitter Instagram Youtube Pit Bull® 26 Fusion Machine is designed for trenches. February 19, 2019 Rolling 28 Fusion Machine has been the standard since 1975. On February 19, 2019, Acrobat™ 180 is used for butt welding applications to flexibly meet the needs of any work site. On February 19, 2019, the Pit Bull® 28 compact fusion machine was built specifically for trenches. On February 19, 2019, TracStar® 28 Series 2 Pipe Welding Machine was the first on site. February 19, 2019 The Revolutionary Talon™ 2000 Talon 2000 is a self-propelled vehicle with a unique ability to safely hoist the pipe from the ground, position it for fusion, and move it from the joint to the Connector. March 15, 2021 TracStar® iSeries – Evolution of Fusion The next-generation TracStar® machine provides the industry with a sophisticated, robust and efficient fusion machine. August 19, 2021 TracStar iSeries features and advantages August 23, 2021 McElroy manufacturing, episode 1-Talon stepped into McElroy's "machine and mechanical world", we learned about Talon-this machine completely subverts tradition Fusion equipment. On February 4, 2021, McElroy® Talon™ 2000 McElroy introduced Talon™ 2000-for fusion of 54-inch OD to 2000 mm OD pipes. March 29, 2016 McElroy® Talon™ 2000 – For fusion of 54in OD to 2,000mm OD tubes May 17, 2016 McElroy Optimized Cooling™ During the fusion process, the most important time for each joint is attributed to the cooling process . March 15, 2021 High-density polyethylene piping system Pipes made of polyethylene are a cost-effective solution to various piping problems in municipal, industrial, marine, mining, landfill, pipeline and agricultural applications. On September 16, 2020, polyethylene plays a vital role in protection. For most people, water has never been a problem until they turn on the tap and nothing comes out. On April 23, 2020, MINEXPO 2021 has less than a week to look forward to seeing you! On September 8, 2021, McElroy University launched new courses and a new webpage. McElroy University provides a wide range of training to meet the needs of the entire industry. On August 19, 2021, McElroy holds a webinar on the future of plastic pipe integration. Learn about McElroy’s new TracStar® i series, and the MCU inspector qualification course on May 4, 2021 is now available online and on-demand, without booking a flight, providing inspections Qualification courses are now available exclusively online through McElroy University. On March 15, 2021, McElroy launched the new Tracstar iSeries Fusion Splicer McElroy built on the traditional success of TracStar® and launched the TracStar iSeries, bringing a new level of performance and reliability to the pipeline fusion splicing industry. On March 12, 2021, McElroy appointed Vikrant Sanglikar as the new country head of the India office. McElroy, a leading manufacturer of pipe fusion machines used in the construction of thermoplastic pipes worldwide, is pleased to announce that Vikrant B Sanglikar will join the team as the new country The director is its India office. January 28, 2021 INFUSION 2020: New products are popular This year's INFUSION showcased two dazzling stars in the form of virtual events-the new TracStar® iSeries and DataLogger® 7. On October 16, 2020 McElroy DataLogger® 7: A powerful new tablet with a battery life of more than 14 hours. McElroy released the new DataLogger 7, which has made progress in battery technology, processing power and integration capabilities. More integration on October 9, 2020, more natural gas Shell announced in October 2018 its plan to develop more onshore natural gas fields in Queensland, Australia. New DataLogger® 6 and Vault™ FAQ on September 16, 2020 We have added a useful new DataLogger and Vault FAQ section to our website. These how-to guides solve some of the most common problems and explain the new features of the two platforms. On April 23, 2020, McElroy University’s new online learning series is now available at McElroy University, and learning is endless. For a limited time, you can still directly receive training from fusion experts through our new online learning series! Stress test on April 16, 2020-DataLogger 6 now available on DataLogger® 6 now provides a guided workflow for recording the details of the stress test and a digital diagram of the process. On March 24, 2020, DataLogger® 6 Update 1.15 provides the groundbreaking feature McElroy brings productivity improvements and exciting new features to DataLogger 6, enabling users to record and analyze more work sites. Infusion19's long-distance product display on March 17, 2020 The biggest star of INFUSION19 is the machine! Guests who come to Tulsa for a three-day peace, love and integration have the opportunity to contact, see and interact with more types of polyethylene and polypropylene products at this year's product exhibition. On October 16, 2019, the McElroy Sidewinder was used to easily achieve saddle fusion. In terms of sidewall fusion, there is no tool better than McElroy Sidewinder for this task. McElroy focuses on TracStar 1200 on September 26, 2019. McElroy is the largest machine in the TracStar series and has everything an operator needs to efficiently fuse 16in OD to 48in OD (450mm to 1200) pipes. On August 20, 2019, McElroy announced the 2019-2020 trade show schedule. McElroy designs and manufactures various fusion equipment for connecting thermoplastic pipes, such as high-density polyethylene (HDPE), fusible PVC™ and polypropylene. On July 16, 2019, McElroy announced additional DataLogger® functions. McElroy has updated its DataLogger 6 additional functions. Introduced on April 23, 2019 Hornet™ XL Outlet Fusion becomes bigger with Hornet XL. McElroy brought the industry's first integrated polypropylene export fusion tool, with branch sizes ranging from 63 mm to 160 mm, with main sizes of 110 mm and larger. McElroy Upcoming Events on April 16, 2019 Below are upcoming events that will showcase McElroy's solutions. March 26, 2019 Plastic pipe welding brings McElroy machines to the Middle East With the opening of a plastic pipe welding factory in Dubai, McElroy fusion machines have a new home in the Middle East. February 25, 2019 McElroy DataLogger® 6 provides expanded machine options, enhanced graphic displays and more features. McElroy DataLogger® 6 provides expanded data collection functions and exciting new features, and now offers free software updates. February 18, 2019 5 DataLogger® 6 Release provides new functions for manual fusion of data logging functions, improved graphic display and more! November 26, 2018 Machine Focus Product Development Director Jason Lawrence TracStar Series 2 Pipe Welding Machine is a self-propelled vehicle equipped with a 4-claw carriage for butt welding of thermoplastic pipes by applying heat and pressure. On July 9, 2018, McElroy launched the Polygon™ integrated machine for miter, butt and undertaking welding. McElroy is a leading manufacturer of pipe welding equipment. Constructing multifunctional tools and plumbing industry for HVAC. On May 14, 2018, McElroy released the industry's first export welding tool. McElroy designed the first integrated welding tool Hornet™ for the export welding of polypropylene pipes. On June 11, 2017, McElroy’s new QuickCamp™ was delivered to a Canadian construction site. McElroy’s new product called the QuickCamp™ system was recently successfully tested on a Canadian construction site, attracting to go there to witness the unique regional contractors and engineers at work Refuge and pipeline processing system. On March 29, 2016, McElroy added Fortiline to the pipe fusion splicer distributor network. McElroy is a leading manufacturer of high-density polyethylene (HDPE) pipe fusion equipment and is pleased to add Fortiline Waterworks to its growing network of distributors. On November 4, 2015, McElroy added a new fusion splicing equipment distributor in Louisiana. McElroy is pleased to announce the addition of a new distributor to provide services to pipeline fusion splicer customers throughout Louisiana. On October 20, 2015, McElroy released its largest TracStar® TracStar® 1200 for large diameter pipes. The release of TracStar® 1200 brought the largest pipe welding capacity in McElroy's popular self-propelled crawler fusion splicer series to date. On October 4, 2015, McElroy's giant welding locomotive handles 2,000 mm pipe operations. McElroy launched Talon™ 2000, which aims to revolutionize the way large-diameter thermoplastic pipes are constructed. McElroy opened an office in India on March 22, 2015. McElroy is a manufacturer of one of the most widely used thermoplastic fusion machine production lines in the world. It has opened an office and demonstration facility in Bangalore, India, specializing in sales, leasing and technical services. February 19, 2015 Use McElroy's OneFit plug-in to improve work site efficiency McElroy further improved work site efficiency by creating the OneFit™ plug-in. On February 8, 2015, McElroy launched In-Ditch 48. The launch of McElroy In-Ditch 48 brings fusion capabilities to restricted working environments using large diameter pipes. On January 19, 2015, McElroy announced the launch of a new hydraulically adjustable pipe rack. McElroy brings hydraulic functions to the pipe rack lines of its 4 inches to 20 inches (200 mm-500 mm) pipes to help improve the welding site. Align thermoplastic pipes effectively. December 14, 2014 DataLogger® 5 is wireless through instant upload and review. McElroy is pleased to bring wireless capabilities to DataLogger® 5, which enables pipeline fusion operators to upload data to the DataLogger Vault™, where review and review can take place. Analyze real-time information from anywhere in the world. On June 10, 2014, PE Pipeline Alliance held a roadshow in Tulsa to promote solutions to replace aging water infrastructure. Cities across the country are facing the expensive and urgent task of replacing outdated water supply systems. Expensive and overly complex issues that disrupt traffic and disrupt services-the familiar waterline breaks. McElroy added three new distributors on April 6, 2014 McElroy recently announced three new distributors to provide services for domestic and foreign customers from east to west. January 1, 2014 North America PO Box 580550 Tulsa OK 74158-0550 United States 1-918-831-9236 customercare@mcelroy.com www.mcelroy.com TracStar® iSeries DataLogger® 7 Facebook Linkedin Twitter Instagram Youtube Asia, South Australia Pacific Unit 7/2 Panama Street Canning Vale Western Australia 6155 Australia Sergio Arellano-Sales Sergio Yibrin-Technical Center 61 8 94557599 (Sales) 61 8 94557599 (Technical Center) sarellano@mcelroy.com syibrin@mcelroy.com Europe, Middle East 11 Avant Business Centre Third Avenue Milton Keynes MK1 1DR Rafael Quintero, UK – Sales Malcolm Profit – Technical Center 1-918-831-9334 (Sales) 44 (0)1908 372259 (Technical Center) rquintero@mcelroy .com mprofit@mcelroy.com Mexico, Central America and Caribbean PO Box 580550 Tulsa OK 74158-0550 Juan Carlos Quintero 1-918-831-9377 jquintero@mcelroy.com South America Av. La Dehesa 1201. Torre Oriente, Oficina 710. Lo Barnechea Santiago Chile Nayib Joussef 56- 9-8449-1000 njoussef@mcelroy.com Brasil Av.Martini Vitoria Rossi 271 Indaiatuba São Paulo 13347-613 Brazil Dave Hughes dhughes@mcelroy.com India 8/4, Whitley Layout Whitefield Bangalore 560 066 India Vikrant Sanglikar 91-80-28454873 vsanglikar Latest news: Robotic applications in the mining industry are buzzing: mentions of robotics in the second quarter of 2021 increased by 93%. November 16, 2021 commodity IG Lithium seeks US brine lithium project Partners November 16, 2021 HSE A dangerous precedent: A new phase of Australian mining company is now available November 16, 2021 Commodity US Geological Survey adds nickel and zinc to the list of key minerals November 16, 2021

For more than 60 years, McElroy has been committed to providing innovative, high-quality products and services. McElroy designed and manufactured a series of fusion equipment for joining thermoplastic pipes including high-density polyethylene (HDPE).

The company provides a full set of accessories designed to improve on-site productivity and efficiency. Its commitment to the industry includes passing McElroy University's extensive training program to ensure that operators and inspectors develop best practices in the quality and reliability of fused piping systems. Mining industry welding machine

HDPE and hot melt joints play an important role in the mining industry. The combination of non-corrosive thermoplastic pipes and hot melt provides a cleaner solution with no risk of leakage. HDPE can withstand the abrasive acidic water commonly found in mines. The fusion machine heat-welds the surfaces of the two pipes together to form an integral pipe. This eliminates the chance of leakage at the joint. For various reasons, mines all over the world have chosen this combination.

Many times, thermoplastic pipes are put into use to transport liquids, gases and even coarse solids, such as slurries. HDPE is usually the first choice because it is flexible and can withstand the ground motions that occur during earthquakes and soil movement.

McElroy designed its first fusion splicer in 1969. Since then, the company's product portfolio has expanded from 0.5 inch copper tube size (CTS) to 2,000 mm pipe size, which is the most comprehensive product line of all welding equipment manufacturers. Fusion equipment is available in a variety of models, from rolling and crawler models to car-only models to meet specific site requirements.

The creation of McElroy TracStar® in the late 1990s was inspired by the needs of the mining industry to create the world's first independent, self-propelled crawler machine. Users benefit from the mobility and hydraulic assistance of their key functions, requiring less manpower and increasing their productivity.

In 2013, McElroy began to adopt a new design to meet the challenge of large diameters, as pipes were increasingly used to 2000 mm. Talon™ 2000 is a self-propelled machine with a jaw design that can automatically load the pipe from the ground, position it for fusion, and move it from one joint to another in the pipe. The new method of processing pipes is called assembly line, which provides a safer and more effective method of fusing large pipes. Productivity optimization accessories

McElroy believes in providing solutions to problems; therefore, in addition to fusion splicers, McElroy also provides a variety of accessories and productivity tools that can significantly improve field efficiency. Examples include its pipe racks and low profile rollers, as well as PolyHorse® and MegaMc® PolyHorse pipe handling systems, which consist of a series of adjustable brackets to store and help move and align pipes on the job site. These adjustable shelves provide a less hazardous environment for handling tube bundles and reduce labor costs while increasing productivity on the job site. Quality assurance of fusion equipment

Quality testing and quality assurance can bring huge benefits to any construction site. McElroy DataLogger® enables the operator to log the parameters of the pipeline fusion process to determine if the correct procedures have been followed. Data elements such as time, temperature and pressure are recorded on this rugged tablet. The latest DataLogger also allows operators to scan data and capture photos and GPS coordinates.

DataLogger can be used in conjunction with Vault™, which is a web-based secure server that can store fusion joint data. This allows users to access their joints from any location and use various analysis tools via internet access.

For quality testing, there are multiple options. McElroy's Guided Side Bend Tester and In Field® Tensile Tester are two such tools that allow for qualitative testing in the field to ensure that the joint meets the appropriate standards. If laboratory type testing is required, McElroy also provides McSnapper® to destructively test impact resistance. Operator training courses

McElroy University provides training through a variety of methods. Training is provided at its factory in Tulsa, Oklahoma through certified instructors across the United States, online courses, and on-site customized training based on customer requirements. Courses include operator qualification, troubleshooting and reconstruction, and inspector training.

Each lesson includes a combination of classroom and practical lessons, followed by after-school tests to ensure that students understand the correct concepts and procedures.

Students who successfully pass the test will obtain the McElroy University Operator Qualification, which is valid for two years.

For more information about McElroy equipment, please visit www.mcelroy.com. White paper McElroy Optimized Cooling™ During the fusion process, the most important time for each joint is attributed to the cooling procedure. Press release MINEXPO 2021 We are looking forward to seeing you in less than a week! Products and services TracStar® iSeries-Fusion's evolution The next generation of TracStar® machines provide the industry with a sophisticated, robust and efficient fusion machine. August 19, 2021 Company link www.mcelroy.com TracStar® iSeries DataLogger® 7 Facebook Linkedin Twitter Instagram Youtube

During the fusion process, the most important time for each joint is attributed to the cooling process.

Looking forward to seeing you!

The next-generation TracStar® machine provides the industry with a precise, robust and efficient fusion machine.

Flexible to meet the needs of any job site.

The first place on the job site.

Talon 2000 is a self-propelled vehicle with a unique ability to safely hoist pipes from the ground, position them for fusion, and move them from joint to joint in the pipe.

The next-generation TracStar® machine provides the industry with a precise, robust and efficient fusion machine.

Walk into McElroy's "machine and mechanical world" and learn all about Talon-this machine completely subverts the traditional fusion equipment.

McElroy introduced Talon™ 2000-for fusion of 54" OD to 2000 mm OD pipe.

During the fusion process, the most important time for each joint is attributed to the cooling process.

Piping made of polyethylene is a cost-effective solution to various piping problems in municipal, industrial, marine, mining, landfill, pipeline and agricultural applications.

Most people never care about water until they turn on the tap and nothing comes out.

Looking forward to seeing you!

McElroy University provides extensive training to meet the needs of the entire industry.

Learn about McElroy’s new TracStar® i series,

There is no need to book a flight, the Inspector qualification courses offered by McElroy University are now only available online.

Based on the traditional success of TracStar®, McElroy launched TracStar iSeries, bringing a new level of performance and reliability to the pipe welding industry.

McElroy, the world's leading manufacturer of pipe fusion machines for thermoplastic pipe construction, is pleased to announce that Vikrant B Sanglikar will join the team as the new country director of its India office.

As a virtual event, this year's INFUSION witnessed two dazzling stars bridging their differences-the new TracStar® iSeries and DataLogger® 7.

McElroy released the new DataLogger 7, which has made progress in battery technology, processing power and integration capabilities.

Shell announced in October 2018 that it plans to develop more onshore natural gas fields in Queensland, Australia.

We have added a useful new DataLogger and Vault FAQ section to our website. These how-to guides solve some of the most common problems and explain the new features of the two platforms.

The study at McElroy University is endless. For a limited time, you can still directly receive training from fusion experts through our new online learning series!

DataLogger 6 now provides a guided workflow for recording the detailed information of the stress test and digital diagrams of the process.

McElroy brings productivity improvements and exciting new features to DataLogger 6, allowing users to record and analyze more work sites.

INFUSION19 The biggest star is the machine! Guests who come to Tulsa for a three-day peace, love and integration have the opportunity to contact, see and interact with more types of polyethylene and polypropylene products at this year's product exhibition.

In terms of sidewall fusion, no tool is more capable of this task than McElroy Sidewinder.

McElroy's largest machine in the TracStar series has everything an operator needs to efficiently fuse 16-inch OD to 48-inch OD (450 mm to 1200) tubes.

McElroy designs and manufactures various welding equipment for joining thermoplastic pipes, such as high-density polyethylene (HDPE), fusible PVC™ and polypropylene.

McElroy has updated their DataLogger 6 with additional features.

The export fusion of the Hornet XL has become even greater. McElroy brought the industry's first integrated polypropylene export fusion tool, with branch sizes ranging from 63 mm to 160 mm, with main sizes of 110 mm and larger.

The following is an upcoming show that will showcase McElroy's solutions.

With the opening of a plastic pipe welding company's factory in Dubai, the McElroy welding machine has a new home in the Middle East.

McElroy DataLogger 6 provides extended data collection functions and exciting new features, as well as free software updates.

Manually incorporate data logging functions, improved graphic displays and more!

The TracStar Series 2 Pipe Welding Machine is a self-propelled vehicle equipped with a 4-claw carriage, which is used to butt and weld thermoplastic pipes by applying heat and pressure.

McElroy, a leading manufacturer of plumbing fusion equipment, has launched the new Polygon, a multifunctional tool designed to meet the needs of the machinery, plumbing, and HVAC plumbing industries.

McElroy designed the first integrated fusion tool Hornet™ for polypropylene pipe outlet fusion.

A new McElroy product called the QuickCamp™ system was recently successfully tested on a Canadian construction site, attracting regional contractors and engineers who went there to witness the unique shelter and pipeline treatment system at work.

McElroy, a leading manufacturer of high-density polyethylene (HDPE) pipe fusion equipment, is pleased to add Fortiline Waterworks to its growing network of distributors.

McElroy is pleased to announce the addition of a new distributor to serve customers of pipe fusion splicers in Louisiana.

The release of TracStar® 1200 brings the largest pipe welding capability in McElroy's popular self-propelled crawler welding machine series to date.

McElroy introduced Talon™ 2000, which aims to revolutionize the way large-diameter thermoplastic pipes are constructed.

McElroy is one of the most widely used thermoplastic fusion machine production lines in the world. It has opened an office and demonstration facility in Bangalore, India, specializing in sales, leasing and technical services.

McElroy further improved field efficiency by creating the OneFit™ plug-in.

The introduction of McElroy's In-Ditch 48 brings fusion capabilities to confined work environments that use large diameter pipes.

McElroy has brought hydraulic functions to its pipe support lines for 4 inches to 20 inches (200 mm-500 mm) pipes to help align thermoplastic pipes more effectively at the butt welding site.

McElroy is pleased to bring wireless capabilities to DataLogger® 5, which enables pipeline fusion operators to upload data to the DataLogger Vault™, where they can be viewed and analyzed in real time from anywhere in the world.

Cities across the country are faced with the costly and urgent task of replacing outdated water supply systems that have disrupted traffic and services due to the breakdown of countless, expensive and very familiar water supply lines.

McElroy recently announced the addition of three new distributors that will serve domestic and foreign customers from east to west.

11 Third Avenue, Qianwei Commercial Center

Av. La Dehesa 1201. Torre Oriente, Oficina 710.

Mining news and in-depth feature articles on the latest mining company transactions and projects, covering mineral exploration trends and the latest data on the most heavily mined metals and mineral commodities

© Copyright Verdict Media Limited 2021